Mecanocaucho. Aplicaciones Mecánicas del Caucho, S.A. Solucion Antivibratoria

Full catalogue:

• Mobile Applications Engines, generators, compressor pumps.
• Static applications: Engines, generators, hydraulic pumps and compressors.
• Rubber blocks and mats. End-of-stroke buffers

[5,6 MB]

cb Mounts

The AMC-MECANOCAUCHO® type CB mounts are installed in pairs. Installation is simplified as both mounts fixed with one through bolt and a washers at each end.

[167 KB]

Hydraulic Mounts

The AMC-MECANOCAUCHO® Hydraulic mounts combine an spring and a hydraulic damper in a single compact unit that allows tuning the spring and the damper independently.

[233 KB]

sh Mounts

Each mount consists of two heavy duty square outer plates with corner hole fixings fully bonded to circular profiled rubber layers separated by interleaf plates.

[196 KB]

Anti-vibration mountings studies

The anti-vibration solution as seen by AMC MECANOCAUCHO ®. AMC engineering services. Calculation, Design, Test and dynamic characterisation and Measurement. Anti-vibration techniques. General characteristics of elastomers.

[419 KB]

BRB

The BRB type AMC Mecanocaucho® mounts are antivibration elements which work the rubber in shear and compression. Their tall height profiles produce large deflections, low natural frequencies, and excellent vibration isolation results. This range of mounts is suitable for applications where high vibration isolation in the 85-95% range is a priority.

[319 KB]

BSB

The BSB type which work the rubber in shear and compression with an optimal ratio of stiffness and horizontal stability. These mounts are really interesting when stability is a priority in an antivibration suspension.

[274KB]

MARINE MOUNT

The Marine-type AMC-Mecanocaucho® mounts are ideal for mobile applications thanks to their rugged architecture.

[353 KB]

CONES

The AMC-Mecanocaucho® cones work the rubber in shear compression. They are composed of two parallel conical metal parts. They have two washers, one as a buffer and the other for centering.

[1,4 MB]

Cabine mount

The AMC-MECANOCAUCHO® cabin mount is composed of two main metal parts. Both metal parts are bonded to a high resilient rubber for optimum vibration isolation.

[323 KB]

MD

The AMC-Mecanocaucho MD-type mounts have similar architecture to the BSB and BRB. The advantage of this mount is that it is a high-damping elastic compound.

[432 KB]

cones WITH FIXATION FLANGE

The cones with fixation flange AMC-Mecanocaucho® work the elastomer at shear compression. They are comprised of a high strength external metal armour and a conical internal that is placed concentrically.

[288 KB]

VD

Type VD AMC-Mecanocaucho® mount works the elastomer at shear compression. It is comprised of 2 metal parts which allow it to be installed with its two built-in screws.

[280 KB]

V-SHAPED MARINE TYPE

The AMC-Mecanocaucho ® V-shaped marine mount works the elastomer at shear compression. It is comprised of 2 metal parts which permit its installation by means of a screw at the top and two holes for securing it to the chassis.

[350 KB]