AMC Mecanocaucho

The AMC Mecanocaucho® Bobbins are devices for making elastic anchorings or fixings. They can be used in a wide variety of applications, particularly for elastic suspensions and anti vibration isolation of machines and different mechanical organs. They are made of a block of rubber with two parallel metal parts at the end which enable it to be fixed either by screws in the ‘’C’’ model or with nuts in the ‘’A” model or a combination of both in the ‘’B” model. The rubber block may be cylindrical in cases requiring greater load capacity or as a diabolo when greater elasticity is required in all directions.

Technical characteristics

Depending on the size of the rubber block, the AMC Mecanocaucho® bobbing has more or less elasticity, which is greater particularly in all directions perpendicular to its axis (shear). The AMC Mecanocaucho® bobbing thus makes it possible to make joins which permit major relative movements, up to several millimetres (in the case of heat expansion, chassis deformations, etc.). The AMC Mecanocaucho® bobbing serves very well for the vibration isolation of machines where the vibrations are perpendicular to their axis, unless these stresses are too much when applied in this direction.

Applications

The AMC Mecanocaucho® bobbins are particularly suitable for installation on small motor-pumps, motor-ventilators, driers, sieves, compactors, washing machines, electrical motors, on-board control panels, measuring apparatuses, control cabinets, microphones, fluorescent tubes, etc.

Drawings

Dimensions

Type	A(mm)	B(mm)	C(mm)	H(mm)	Weight(kg)	COMPRESSIONMax. Load (daN)	COMPRESSION Deflection (mm)	SHEAR Max. Load (daN)	SHEAR Deflection (mm)	Code
BOBBINS TYPE B 12-25	12,5	10	M-5	10	0,0055	12	0,5	1,5	0,5	121001
	12,5	15	M-5	10	0,006	10	0,5	1,5	0,5	121002
	12,5	20	M-5	10	0,007	8	1	1,5	0,5	121003
	16	10	M-5	12	0,008	20	0,5	2,5	0,5	121011
	16	15	M-5	12	0,01	20	2	2,5	1,5	121012
	16	20	M-5	12	0,011	15	2,5	2,5	2	121013
	16	25	M-5	12	0,012	15	3	2	2	121014
	20	15	M-6	16,5	0,017	35	2	5	1,5	121022
	20	20	M-6	16,5	0,018	30	3,5	5	2,5	121023
	20	25	M-6	16,5	0,02	30	5,5	4,5	4	121024
	20	30	M-6	16,5	0,022	25	6	4,5	4	121025
	25,5	15	M-6	18	0,025	60	2,5	8	2	121172
	25,5	20	M-6	18	0,0277	55	3,5	8	2,5	121173
	25,5	25	M-6	18	0,031	50	5	8	3,5	121174
	25,5	30	M-6	18	0,038	50	6	8	4	121175
	25,5	15	M-8	20	0,036	60	2,5	8	2	121031
	25,5	19	M-8	20	0,04	55	3,5	8	2,5	121032
	25,5	22	M-8	20	0,0875	50	4	8	3	121033
	25,5	25	M-8	20	0,042	50	5	8	3,5	121034
	25,5	30	M-8	20	0,045	50	6	8	4	121035
	25,5	40	M-8	20	0,0525	50	7	10	5	121036

Drawings

Dimensions

Type	A(mm)	B(mm)	C(mm)	H(mm)	Weight(kg)	COMPRESSIONMax. Load (daN)	COMPRESSION Deflection (mm)	SHEAR Max. Load (daN)	SHEAR Deflection (mm)	Code
BOBBINS TYPE B 30-40	30	15	M-8	20	0,051	90	1	11	1	121041
	30	22	M-8	20	0,057	80	3	11	2,5	121042
	30	25	M-8	20	0,053	75	4,5	11	3,5	121186
	30	30	M-8	20	0,143	70	5,5	11	4,5	121043
	30	40	M-8	20	0,072	60	7,5	11	6	121044
	40	20	M-8	20	0,082	160	2	20	1,5	121193
	40	25	M-8	20	0,087	150	4	20	3	121194
	40	28	M-8	20	0,094	150	5	20	4	121195
	40	30	M-8	20	0,0935	150	6	30	5	121196
	40	35	M-8	20	0,102	120	7	20	5,5	121197
	40	40	M-8	20	0,112	120	8,5	20	7	121198
	40	45	M-8	20	0,12	120	9	20	7	121199
	40	20	M-10	25	0,09	160	2	20	1,5	121051
	40	25	M-10	25	0,098	150	4	20	3	121191
	40	28	M-10	25	0,106	150	5	20	4	121052
	40	30	M-10	25	0,104	150	6	30	5	121192
	40	35	M-10	25	0,118	120	7	20	5,5	121053
	40	40	M-10	25	0,124	120	8,5	20	7	121054
	40	45	M-10	25	0,131	120	9	20	7	121055

Drawings

Dimensions

Type	A(mm)	B(mm)	C(mm)	H(mm)	Weight(kg)	COMPRESSIONMax. Load (daN)	COMPRESSION Deflection (mm)	SHEAR Max. Load (daN)	SHEAR Deflection (mm)	Code
BOBBINS TYPE B 50-75	50	20	M-10	25	0,134	300	3	25	2,5	121201
	50	25	M-10	25	0,146	300	3,5	25	3	121061
	50	30	M-10	25	0,34	275	5	25	4,5	121202
	50	35	M-10	25	0,37	250	7	25	6,5	121062
	50	40	M-10	25	0,176	210	8,5	25	7,5	121203
	50	45	M-10	25	0,192	190	9	25	8	121063
	50	50	M-10	25	0,192	170	9,5	25	8,5	121204
	50	60	M-10	25	0,222	150	10	25	9	121064
	60	25	M-10	25	0,21	400	3	30	2,5	121071
	60	36	M-10	25	0,247	300	6	30	5,5	121072
	60	45	M-10	25	0,278	250	8	30	7	121073
	60	60	M-10	25	0,311	200	9	30	8	121074
	70	35	M-10	25	0,316	450	6	35	5,5	121081
	70	50	M-10	25	0,38	350	7,5	35	7	121082
	70	60	M-10	25	0,42	300	8	35	7	121083
	70	70	M-10	25	0,483	300	9,5	35	8,5	121084
	75	25	M-12	30	0,302	650	3,5	37	3	121091
	75	40	M-12	30	0,384	500	7,5	37	7	121092
	75	45	M-12	30	0,41	500	9	37	8	121093
	75	55	M-12	30	0,455	450	10	37	9	121094

Drawings

Dimensions

Type	A(mm)	B(mm)	C(mm)	H(mm)	Weight(kg)	COMPRESSIONMax. Load (daN)	COMPRESSION Deflection (mm)	SHEAR Max. Load (daN)	SHEAR Deflection (mm)	Code
BOBBINS TYPE B 80-150	80	30	M-14	35	0,45	950	4	40	4	121101
	80	40	M-14	35	0,505	600	7	40	7	121102
	80	50	M-14	35	0,547	550	8	40	8	121103
	80	55	M-14	35	0,58	550	8,5	40	8,5	121104
	80	70	M-14	35	0,66	500	12	40	12	121105
	80	75	M-14	35	0,71	450	12,5	40	12,5	121106
	95	40	M-16	45	0,76	1200	7	60	7	121111
	95	55	M-16	45	0,88	1000	9	60	9	121112
	95	60	M-16	45	0,925	800	11	60	11	121113
	95	75	M-16	45	1,05	700	13	60	13	121114
	105	50	M-16	45	0,92	1200	6	80	6	121121
	105	75	M-16	45	1,2	1000	8	80	8	121122
	105	100	M-16	45	1,444	800	11	80	11	121123
	120	50	M-16	45	1,09	1500	6,5	100	6,5	121131
	120	75	M-16	45	1,43	1200	10	100	10	121132
	120	100	M-16	45	1,77	1000	12	100	12	121133
	130	50	M-16	45	1,591	1600	9	120	9	121142
	130	75	M-16	45	1,96	1450	13	120	13	121143
	130	100	M-16	45	2,426	1200	16	120	16	121144
	150	50	M-20	50	3,301	1800	9	140	9	121151
	150	75	M-20	50	4,001	1650	13	140	13	121152
	150	100	M-20	50	3,7	1400	16	140	16	121153

AMC MECANOCAUCHO®
BOBBINS TYPE B

Technical characteristics

Applications

Drawings

Dimensions

Drawings

Dimensions

Drawings

Dimensions

Drawings

Dimensions

Elastic properties

Operation and Assembly

Advantages

AMC MECANOCAUCHO® BOBBINS TYPE B

Technical characteristics

Applications

Drawings

Dimensions

Drawings

Dimensions

Drawings

Dimensions

Drawings

Dimensions

Elastic properties

Operation and Assembly

Advantages

AMC MECANOCAUCHO®
BOBBINS TYPE B