AMC Mecanocaucho

AMC-MECANOCAUCHO&Reg; ATP type anti vibration mounts have been designed to provide effective vibration isolation of medium to high frequency applications in a variety of industrial machinery - generator sets, motor pumps, motor compressors, hydraulic units, etc. The top metal part is cup shaped to protect the rubber section from contamination by oil , grease , petrol diesel and other contaminants.

Technical characteristics

The compound used is based on a standard natural rubber specifically designed to have good ageing properties . Load capacities shown in catalogue are the maximum Static values with the capability of withstanding occasional extreme dynamic overloads . ATP mounts have stiffness values 4 times greater in the radial plane than the axial plane , providing effective resistance to transient lateral shock loads .

Applications

• Suspension systems where it is deemed necessary to control any Pitching or Rolling movement which could strain external connections. • Medium and high frequency motor compressor units. • Gen sets. • Hydraulic Units. • Marine auxiliary units. • Ventilators , etc .

Drawings

Dimensions

Type	A(mm)	B(mm)	C(mm)	D(mm)	E(mm)	F(mm)	G(mm)	Weight(gr)	B1(mm)	Max. Load(kg)	Shore	Fig.	Code
ATP 020	49,7	31,5	M-8	50	7	68	16	143	-	50	45 Sh	2	133101
										75	60 Sh	2	133102
										100	75 Sh	2	133103
ATP 120	73,6	43	M-10	72,2	9,2	90	32	379	53	70	45 Sh	2	133104
										120	60 Sh	2	133105
										175	75 Sh	2	133106
										70	45 Sh	1	133151
										120	60 Sh	1	133152
										175	75 Sh	1	133153

Drawings

Dimensions

Type	A(mm)	B(mm)	C(mm)	D(mm)	E(mm)	F(mm)	G(mm)	Weight(gr)	B1(mm)	Max. Load(kg)	Shore	Fig.	Code
ATP 220	91	53	M-12	90	11	114,2	36	618	63	140	45 Sh	2	133107
										200	60 Sh	2	133108
										300	75 Sh	2	133109
										140	45 Sh	1	133154
										200	60 Sh	1	133155
										300	75 Sh	1	133156
ATP 420	124,5	75	M-16	114	13	144	16	1510	94	300	45 Sh	2	133110
										500	60 Sh	2	133111
										800	75 Sh	2	133112
										300	45 Sh	1	133157
										500	60 Sh	1	133158
										800	75 Sh	1	133159

Operation and Assembly

ATP mountings use the rubber section in a shear mode to achieve the best load /deflection values . Due to the interior design of the rubber section they have a progressive stiffness feature, preventing metal to metal contact in the case of impacts or extreme overload in transient shock conditions on mobile equipment . ATP mounts can be attached to the support structure by Set Screws or Bolts , or by threaded studs securely grouted to the floor to suit the base plate attachment holes .

Advantages

• Easily assembled to the machine and the support structure . • Top metal cap protects the rubber section against various contaminants- diesel , oils , grease , petrol , etc . • Effectiveness – three variations in hardness - Soft: A 45, Medium: B 60, Hard: C 75. This enables the user to choose each mount depending upon the load to be supported and the frequency of the vibrations to be attenuated.

ATP Anti vibration mounts

Technical characteristics

Applications

Drawings

Dimensions

Drawings

Dimensions

Elastic properties

Operation and Assembly

Advantages